Many people may be wondering how to get rid of mold on car body. Because, the existence of mold or mildew on the car body is very disturbing, especially the type of black mold that causes stubborn stains and is difficult to clean.

Plus, mold on the car body can also affect health because it causes allergic reactions. Therefore, if you find mold on the car body, you must immediately clean it so as not to damage the car paint. Take a look at the following guide!

1. How To Get Rid Of Fungus On Car Body With Natural Ingredients

On the market today, there are many mildew cleaners with chemicals. But, you're not going to lose anything by trying a safer alternative. You can try to remove mold on car body with natural ingredients.

Before starting how to remove mold on car body, you should take the car outside and be in the shade.

Open all windows and doors for 20-30 minutes, so that the vehicle is not too humid which can trigger mold growth. Then, wear gloves and a face mask when removing mold from the vehicle body.

Ready? Let's start the steps below!

Method 1: Vinegar and water

Vinegar is one of the ingredients needed in how to get rid of mold on car body.

You'll also need a 100ml spray bottle, water, and a microfiber cloth.

• Mix about 20 ml of water and 80 ml of vinegar in a spray bottle.
• Spray this solution on the moldy surface of the car body. Allow the cleaning solution to settle for at least 20-30 minutes. The vinegar will kill and eradicate any mold or spores.
• Take an old soft-bristled toothbrush to scrub the surface of the car body and clean the attached fungus.
• The last step is actually optional. You can sprinkle borax ( sodium tetraborate decahydrate ) on areas of the car body that are affected by fungus. Leave it for 10 minutes before rinsing.

Method 2: Salt

By dissolving sea salt and water, you can kill mold or spores. To apply this method, make sure to use only sea salt because it is a type of salt that is not added by other chemicals.

Please note that salt is inhibiting the development of mold or spores. Follow these steps:

• Dissolve a cup of sea salt in a small bucket of water. Pour the cleaning solution into a spray bottle.
• Spray the salt solution on the area of the car body that has mold. Make sure the area looks slightly damp. Leave or let sit for at least 20 minutes to kill mold and mildew.
• Next, if a white salt crust begins to form on the surface of the car body that is affected by mildew, scrub it with an old toothbrush to remove it.

2. How to get rid of mold on car body using cleaning products

Currently on the market there are many different cleaning products that are effective as a way to get rid of mold on the car body. Aerosol-based cleaning products contain certain enzymes that can inhibit the growth of mold and mildew.

You will need to provide a spray bottle filled with a mixture of cleaning product and warm water (5:1). Make sure to wear gloves and a mask before starting spraying to be on the safe side. Next, follow these steps:

• First, clean all surfaces of the car body, you can use a multi-purpose cleaner.
• Then, spray the liquid onto the mold-affected surface. Leave it for 5-10 minutes.
• Take an old toothbrush to scrub the moldy car body parts to make it easier to clean.
• When spraying cleaning fluid on the car body, if it is too wet, use a microfiber cloth to wipe it.

3. How to Remove Fungus on Car Body with Pressure Wash

One other alternative method that is effective for removing mold on the car body is a pressure wash or jet hose.

However, keep in mind that if the rubber trim is cracked, the paint is peeling, or there is rust, you should not use this method.

In general, if the overall condition of the car is good, then you can choose the pressure wash method . Follow these steps:

• Use a fan-attachment so that the pressure is not concentrated in one area.
• Place the fan-attachment about 2 meters from the area.
• Start with medium to low pressure.
• If the mold doesn't go away, increase the water pressure, but keep the spray distance from getting too close to the car body.

4. How to get rid of fungus on car body with snow foam

At the car wash, many are offered washing services with foam snow. This material is designed with certain substances that break down dirt, including mold or mildew, so the car looks cleaner.

Next, you can follow these steps:

• Mix the snow foam according to the instructions on the label directions.
• Apply the foam to the affected area.
• Leave it for 3-5 minutes (don't let it dry on the surface).
• Rinse using a regular hose or a high pressure hose.

5. Shampoo and Microfiber Cloth

If the fungus attached to the car body is still relatively light, you can use this method.

To do this, you need to use a microfiber cloth and car shampoo. Car shampoo products are recommended because they are safe for car paint. If you don't have a microfiber cloth, you can use a regular sponge.

Here's how to use it:

• Wet the affected area.
• Put the shampoo on a microfiber cloth until it lathers.
• Rub and rub gently on the moldy area.
• Rinse and repeat the process until the mold stain is gone.

6. Apply Car Coating

The final step to consider is applying a car coating . By adding a layer of coating on the car body, it can help prevent the growth of fungus.

You can protect the surface of the car body by waxing , sealant , or ceramic coating .

If the fungus is not too severe, you can use a sealant . This is because sealants are easy to apply and are usually much more durable than car wax .

How to Prevent the Appearance of Fungus on the Car Body?

So, how to get rid of mold on car body can be a bit of a hassle. However, that doesn't mean you can do it carelessly. Most importantly, do the steps above to prevent the fungus from appearing again.

The best thing to protect your vehicle from mold or mildew is to wash it regularly. It is recommended to wash the car at least once a month. And you will not be bothered by mold or mildew that interfere with the appearance of your favorite car.

Thank you for reading this article. Check out the Hyundai Motor Studio website for more interesting info.